CAN-BUS RELAY

CAN-BUS RELAY

[N1003-CR]
IN STOCK

Fits to: Universal - Indicators

€29.50 GST Incl.

Qty:
FREE SHIPPING FOR CART OVER € 150,00 (ONLY IN ITALY)
Confirm your order in 0 hours and 23 minutes so we can ship today!*
*Only for italian order
Description
The CAN-BUS RELAY BARRACUDA is an electronic component essential for the correct operation and flashing of the direction indicators relating to most vehicles equipped with the CAN-BUS system.

The CAN-BUS RELAY supplies an electrical load necessary for the correct operation and flashing of the BARRACUDA LED INDICATORS through the combination of the appropriate switches.

It is possible to operate up to 2 channels, for example: the direction indicators in the Rear Left and direction indicators in the Rear Right.

The CAN-BUS RELAY BARRACUDA can also be used on vehicles equipped with original LED direction indicators.

The following resistance values ​​can be set:
150 ohms
170 ohms
200 ohms 240 ohms 300 ohms 400 ohms 600 ohms
1200 ohms

Cable length = 200mm with 3mm Faston

Connections:
Yellow = channel 1 input (+)
Orange = output channel 1 (+)
Blue = input channel 2 (+)
Red = output channel 2 (+)
Gray = input mass (-)
Black = exit surface (-)

Connectivity: 1 CAN-BUS REALIS for 1 PAIR of INDICATORS.

The CAN-BUS RELAY BARRACUDA is an electronic component essential for the correct operation and flashing of the direction indicators for most vehicles equipped with the CAN-BUS system.
The CAN-BUS RELAY supplies an electrical load necessary for the correct operation and flashing of the BARRACUDA LED INDICATORS by means of the combination of the appropriate switches.
Up to 2 channels can be operated, for example: direction indicators in the Rear Left and direction indicators in the Rear Right.
The CAN-BUS RELAY BARRACUDA can also be used on vehicles equipped with original LED direction indicators.
The following resistance values ​​can be set: 150 ohm 170 ohm 200 ohm240 ohm300 ohm400 ohm600 ohm 1200 ohm Cable length = 200mm with 3mm Faston Connections: Yellow = channel 1 input (+) Orange = output channel 1 (+) Blue = input channel 2 (+) red = output channel 2 (+) gray = input ground (-) black = output surface (-)
Connectivity: 1 CAN-BUS REALIS for 1 PAIR OF INDICATORS.

THE SHIPMENT COST in Italy are fixed at euro 10,00. Only for orders over euro 150,00 the shipment is FREE. 

The SHIPMENT OF ORDER is immediate for the available shipment (highlighted with green availability) and if the order is made by 16:00 (GMT+1). 

The DELIVERY is schedule in 24/48h.
After the order confirmation, you will be informed about the data and rough hour of delivery by a sms sent by the transporter to the cell phone put into the log-in. In case of holidays and/or strikes, shipment may be delayed.

The RIGHT OF RETURN is valid for 15 days from the delivery date, the product has to be none signs or damages to the materials or to the blister.  We advice to send back the products with care. All the return back materials must be agreed with our technician office ([email protected])

This site uses cookies, including third parties to send advertising and services in line with your preferences. By closing this banner, scrolling through this page or by clicking any element its consent to the use of cookies. More information Find out more here.
x